The Sawyer Squeeze Point One and Sawyer Mini Water Filters are the most popular water treatment and purification systems used by backpackers today (approximately 40% use them according to a recent survey).
- (which includes 2 x 32 oz. water reservoirs, a cleaning syringe, etc.) comes with the fatter Sawyer Point One water filter, so-named because it has a 0.1 micron absolute hollow fiber membrane filter that removes 7 log (99.99999 percent) of all bacteria like salmonella, cholera and E. coli, and 6 log (99.9999 percent) of all Protozoa such as Giardia and Cryptosporidium.
- (which include a 16 oz. water reservoir, a cleaning syringe, etc.) comes with the thinner Sawyer Mini water filter, also a 0.1 micron absolute hollow fiber membrane filter, with the same filter bacteria and protozoa removal efficacy rates as the Sawyer Point One, listed above.
How can you decide between the two? It really depends how you intend to use them: as an inline filter with a reservoir, as a gravity filter, in a squeeze system, or directly attached to a bottle.
I’ve used both of these Sawyer filters for years, on hundreds of day hikes and backpacking trips, and recommend the following:
- If you want an inline filter on a reservoir hose, use the . In this configuration, you put “dirty” water in your reservoir and suck it through through the inline filter, spliced into your hose. The Sawyer Mini has hose compatible connectors on the two ends that make this configuration possible.
- The same holds for a gravity filter configuration, where you’d position the on a hose between a “dirty” reservoir and a “clean” reservoir.
- If you carry water bottles or a reservoir and want to refill them with “clean water”, use the . In this configuration, fill a reservoir with “dirty water”, screw on the filter, and squeeze the water through the filter into your “clean” bottles or reservoir. The flow rate of the Sawyer Point One is much faster than the Mini because it has a bigger diameter and more surface area. It also needs to be back-flushed less frequently to improve the flow rate.
- Sawyer provides a mouthpiece and a cap to protect the cleanliness of the and the , so you can screw the filters onto a reservoir or water bottle and suck on them directly to get a mouthful of water. But, I’ve never found the caps to stay on reliably, increasing the risk of cross-contamination. Your mileage may vary.
My preferred method is #3, squeezing water from a “dirty” reservoir to “clean” water bottles. For this, I prefer using the
What have your experiences been with these two different water filters?
Disclosure: The author purchased the products discussed is this article with his own funds.
Support SectionHiker.com, where we actually field test the products we review. If you make a purchase after clicking on the links above, a portion of the sale helps support this site at no additional cost to you.
Most Popular Searches
- sawyer mini vs squeeze
- sawyer squeeze vs mini
- sawyer squeeze vs sawyer mini